55,5625 mm x 100 mm x 55,6 mm FYH ER211-35 FYH Bearings

Recommended tightening torque for set screw:3.7 Nm; G:M6x1; Weight:1.01 kg; C0:11.2 kN; A1:9.5 mm; B:38.1 mm; S:15.9 mm; d:30.16 mm; Designation of housing:FCE206-; e:2 mm;

D1:310 mm; Y0:2.89; Number of lubrication holes:3; e:0.23; B:90 mm; b:15.4 mm; ra max:2.5 mm; D:340 mm; Max operating temperature, Tmax:200 °C; Dynamic load, C:1,530 kN;

Designation of housing:FL204-; S:17 mm; d:17.46 mm; A:25.5 mm; T min.:-20 °C; B:34 mm; s1:30.5 mm; e:15 mm; Recommended tightening torque for set screw:3.7 Nm; A1:11 mm;

B:24 mm; rs min:1.1 mm; Mass (without HJ ring):0.35 kg; Static load, C0:56 kN; Fatigue limit load, Cu:6.8 kN; Weight / Kilogram:0.353; Characteristic rolling element frequency, BSF:4.17 Hz; Minimum Buy Quantity:N/A; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:6.

Characteristic rolling element frequency, BSF:8.17 Hz; Fatigue limit load, Cu:2.2 kN; Static load, C0:54 kN; da min:108 mm; Brand:NTN; ra max:1.5 mm; d:100 mm; Characteristic cage frequency, FTF:0.44 Hz; f0:15.9; Mass:1.15 kg;

d:15 mm; Designation of housing:PA204-; E:13 mm; A1:22 mm; N:M10; H:30.2 mm; C0:6.65 kN; Weight:0.67 kg; L1:22 mm; L:76 mm;

Width B:49.20 mm; Sealed Speed Rating n3:3800 rpm; Bore d:55.000 mm; Basic Dynamic Radial Load Rating C:119000 N; Accessories:Two Seals; Outside Diameter D1:120.0000 mm; Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:122000 N; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:2.00

B:55.6 mm; Designation of open end cover:SCOU211-34; C:43.55 kN; H2:126 mm; H1:25 mm; H:63.5 mm; T max.:100 °C; L1:40 mm; Designation of bearing:UC211-34G2L3; C0:29.2 kN;

B:31 mm; Designation of closed end cover:SCC204; A:40 mm; T max.:200 °C; H1:11 mm; Dz:54 mm; C:12.8 kN; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm; E:13 mm;

L:108 mm; J:148 mm; d:45 mm; A2:52.2 mm; C:25.7 kN; C0:20.8 kN; Weight:1.95 kg; N:17.5mm; Designation of housing:SFL209N-; H:180 mm;

Recommended tightening torque for set screw:8 Nm; Designation of housing:FLE210N-; T min.:-20 °C; N:18mm; e:24 mm; G:R1/8"; H:190 mm; A:41.6 mm; B:43.5 mm; Z:38.9 mm;

N2:49 mm; T max.:200 °C; C0:23.2 kN; SW:4 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:US210G2T20; N:29mm; N1:19 mm; B:43.5 mm; L2:16 mm;

Designation of housing:PFE206-; A2:38.8 mm; T min.:-20 °C; N:8,7mm; B1:35.7 mm; d:28.58 mm; T max.:100 °C; B:23.8 mm; s1:27.8 mm; T:2.5 mm;

N:18mm; G:M6x1; L:185 mm; Weight:3.17 kg; C:43.55 kN; B:55.6 mm; A:27.5 mm; C0:29.2 kN; d:53.98 mm; A2:33.4 mm;

H2:102 mm; L1:106 mm; G:M6x1; B:55.6 mm; Designation of housing:T211-; Weight:3.9 kg; C0:29.2 kN; T min.:-20 °C; N1:25 mm; L3:95 mm;